Rectilinear chain conveyors with plate support TRCL
TRCL chain conveyor is suitable for handling materials weighing from 500 to 2000 Kg. The material conveyed is of various types and according to its nature the chain will be equipped with suitable passage systems between the conveyors of the same line.
| Length | Approx. 4000 mm |
| External width |
Approx. 600 / 700 mm |
| Height to the ground | Standard: approx. 400 mm |
| Drive unit | On the head end of the chain |
| Transmission | Through reduction gear and transmission shaft to the parts of the chain conveyor |
| Type of chain | 1/3 of an inch, simple, flat link, top quality chain, tensioned with breaking load at 6,000 Kg |
| Capacity | from 500 to 2.000 kg, depending on the drive unit and speed required |
| Fixed speed | 6 metres/minute |
TRCL distinguishes itself thanks to its stoutness and modularity (that allows further integrations after its installation). It is pre-arranged for the installation of protections between the chains by means of sheeting.
The chain line is mainly composed of:
- thick laser-cut sheet carpentry used to fix all the components of the conveyor
- polizene guides to support the transport chain
- flat link conveyor chain to avoid the “marking” effect of the polizene support, which can be caused by the stop of heavy packages
- connection between powered shaft and chains by means of keying
- chain transmission through pinions on sealed bearings
- supporting cross-pieces of the chains screwed onto the structure
- supporting tubes for the chains screwed onto all the other conveyor elements
- legs fixed to the chain supporting tubes and to the jointing cross-pieces
- pre-arrangement for the installation of closing sheet between the transport chains
- perfect guards of the moving parts in dangerous areas
