Lifters and hoisters systems
OMT Biella Srl mainly proposes two vertical hoisting models suitable for material handling.
EDMA - Vertical hoister with alternating motion
MAIN FEATURES
Product to handle
Boxes
Function
Alternating
Loading height
800 mm
Unloading height
14.000 mm
Total height
15.000 mm
Loading – unloading difference in height
13.200 mm
Total width
1.300 mm
Plan overall length
1.900 mm
EDMA hoister consists of:
-
Self-supporting modular structure made from press-bent sheet screwed to the modules
- Covering panels in carbon steel, press-bent by stiffening with covering grids
-
Moving truck on self-centering wheels, running along the vertical hoister axis to feed the loading and unloading surface
-
C40 steel shafts carefully processed with high diameter; they are suitably positioned to allows the chain or belt transmission of the footboard
- Chain transmission pinions or toothed belt with sealed bearings
- Sealed dust-proof oscillating supports of 2RS type
- Self-braking reduction gear, suitable powered and keyed on the pull slide. The drive unit transmits the transmission to the truck chain or belts thanks to transmission systems, while suitable counterweights allow minimising the reduction gear effort thus rendering the hoisting system safer.
The EDMA PN version is also available, which is characterised by a pneumatic up and down movement.
EDPC - Vertical hoisting system with continuous platform
Product to handle
Boxes
Function
Continuous
Loading height
800 mm
Unloading height
14.000 mm
Total height
15.000 mm
Loading – unloading difference in height
13.200 mm
Total width
1.300 mm
Plan overall length
1.900 mm
Flatboard sizes
900 x 900 mm
The EDPC hoister consists of:
- Self-supporting modular structure made from press-bent sheet screwed to the modules
- Covering panels in carbon steel, press-bent by stiffening with covering grids
- C40 steel shafts carefully processed with high diameter
- 1 inch transmission pinions complete with sealed bearings
- Pre-tensioned chains in 1 inch steel
- Polizene chain-guide profiles fixed to the structure, suitable to drive the two chain parts that control the mobile platforms
- Sealed dust-proof oscillating supports of 2RS type
- Self-braking reduction gear, suitable powered and keyed on the pull slide. The drive unit transmits the transmission to the truck chain or belts thanks to transmission systems
- Mobile platforms made of galvanised tubular slat and special fastening pins for fixing to the chains
